Honda Foreman Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,694 Posts
remove wheel and hub, then remove the 6 bolts on the brake cover and look around the edge of it there are 2 slots to help pry it off. it can be a pain somethime to get off so be careful, the cover will bend easy.
remove or loosen the rear brake cables then you should be able to slid the drum off the brake shoes. once you get everything off before putting it back together grease the brake cam good, they are known for freezing up. also apply grease around the brake cover oring. it would also be a good ideal to change out the brake cover seal while you have everything off.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top