Honda Foreman Forums banner
1 - 1 of 4 Posts

· Registered
265 Posts
Just unhook the carb turn it upside down. Get a screw driver that would fit in the 4 screws really good. Push on the screws really hard then turn left to loosen them. Take out all four screws then the carb bowl will come out. You will see the jet. Get a nice flat head screw deiver thats fits in their good like the screwdriver for the bowl take out the old jet and put the new one in. after that put it all back together and adjust the air fuel screw to the instructions. Then put everyting else back together.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.