I could not find the Formula88 so I tried Grease Lightning. WHoooow, Directions say to use stright. Worked so good I think I may have to check the thickness of all the metal parts now. Next time I will dilute like the other stuff at least 50/50. But it did work, just alittle to good.
How do you clean your atv?
How does everyone clean their bikes?
1. rinse off the bulk and loose stuff.
2. Formula 88 diluted to 40%with water, spray it all over the bike top to bottom.
3. wait a minute after covering the bike
4. Rinse it all off. No rubbing needed ever.
5. Use a leaf blower to dry most of the water, towel dry the rest.
6. Finish 2000 wax after a couple rides, helps the mud slide off.
7. I coat the underside of my bike (plastics) w/ Mud Release and Silicone/WD-40 spray (everything else) before every ride.
8. I also use Silicone tire dressing foam on tires and plastic as well.
Is that too anal?
1. rinse off the bulk and loose stuff.
2. Formula 88 diluted to 40%with water, spray it all over the bike top to bottom.
3. wait a minute after covering the bike
4. Rinse it all off. No rubbing needed ever.
5. Use a leaf blower to dry most of the water, towel dry the rest.
6. Finish 2000 wax after a couple rides, helps the mud slide off.
7. I coat the underside of my bike (plastics) w/ Mud Release and Silicone/WD-40 spray (everything else) before every ride.
8. I also use Silicone tire dressing foam on tires and plastic as well.
Is that too anal?
1 - 1 of 50 Posts
1 - 1 of 50 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Foreman Forums
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon
Full Forum Listing
Explore Our Forums
Recommended Communities
