Honda Foreman Forums banner
1 - 1 of 9 Posts

· Registered
Joined
·
1,236 Posts
Depends on why you want to adjust the pilot screw .. If you installed an aftermarket performance exhaust ,or installed a higher flow air filter then you will need to re-jet.. But if the bike is just running a little lean or rich then adjusting the pilot screw maybe all you need ..

If either of these files don't work PM me and I will email them direct ..Sometimes the free file host doesn't work so good ..

Here is Section #6 from the 2005-05 Honda TRX500FE shop manual this will show you where the pilot screw is and the proper way to adjust it ..

Download File


Also here is the Honda Common Service Manual .. This manual has 393 pages and is full of good info on Honda engines it has a good fuel section ..

Download File
 
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top