Honda Foreman Forums banner
1 - 1 of 1 Posts

· Registered
1,236 Posts
Energy conserving oil/additives will cause the centrifugal clutch to slip .. As long as it didn't slip to much/long then it probably didn't burn the centrifugal clutch drum .. What I'd do it change the oil a couple/several times using cheap 10w30 letting it warm up good between changes ... Then change it using Honda 10w40 , if it does slip Honda says clean up the inside of the drum using ..

Centrifugal Clutch Outer Cleaning
• Scour/clean the inside of the clutch
outer using a Maroon Scotch Guard
Pad or equivalent, or 220 grit wet/dry
sandpaper and parts washer solvent.
Clean parts prior to reassembly.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.