Honda Foreman Forums banner

Honda Mech, Help. 02 Rancher,Charging trouble.

1600 Views 2 Replies 3 Participants Last post by  hntruckman
Not getting any charge after the Regulator. The Regulator is good tested it on my 400. Did the resistance test on the mag and have .3 ohms resistance on all 3 yellow contacts. I even went as far as testing the Diode, its working as it should. I'm out of ideas, is the mag pooched? It the only thing before the Regulator that it could be.

I swamped batteries too, with the same results.
1 - 3 of 3 Posts
Did you do all the tests for the charging system ... Here are the tests


http://www.sendspace.com/file/vtrczl
my rancher stoped chargin and it turned out to be the rectifier on the frame at the rear.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top