Honda Foreman Forums banner

honda foreman custom lift

2167 Views 2 Replies 2 Participants Last post by  pondhopper1
G
I was wondering if it was possible to build longer a arms for my foreman with 1 inch square tubing i have all the tools needed to weld and cut with. Iwould like to get more lift at all possible.Ialready have gorilla axles so it would not take much to get them lenghtened any help would be appreciated.
1 - 3 of 3 Posts
check this link out and shoot Pondhopper1 a p/m. He will be able to answer your questions if hes willing to give up his secrets. <a href="http://www.hondaforeman.com/phpBB2/viewtopic.php?t=4148" target="_blank">http://www.hondaforeman.com/phpBB2/viewtopic.php?t=4148</a>
Fill free to ask.

Just send me a pm.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top