[#48FAN]

I got mine a couple weeks ago and they were right. Must be a recent problem. Just like the stock springs, the rears are about 2 " or so longer.

 

[#48FAN]

QUOTE ("big_daddy_bigfoot":31xllvdu)

48 did you get the tool?

Naw BigDaddy, I did not get the tool. I had helped a buddy put a lift on his 4Runner a couple month back and still had the tool from AutoZone. Someone on here said it worked better. At least the one I had didn't, the lip was too big to fit over the springs and between the strut. I did my Lift kit at the same time so I pulled the stock spring and shocks off he bike and took it to a local ATV shop. No auto shops around here had a spring compresser for struts and springs that small. It cost me $35 w/ tax which was fine with me because the tool was $40, and I did not have to risk breaking my face! I heard the highlifter tool you have to put in a vice. Did you get yours done yet? I would definately sell that tool after you get done with it, unless you plan on using it again.