Honda Foreman Forums banner

half shaft

1654 Views 3 Replies 2 Participants Last post by  justinwilliamskx
how do i get the axel seperated so i can replace only the lower half i see that they sell the half shafts but how do i get the upper cup seperated i have it out just not apart thanks
1 - 4 of 4 Posts
on the inboard cup(diff. side), remove the boot clamps and slid the boot down the axle shalf. there is a circle clip on the inside of the cup. Once you remove the cir clip the cage will side out of the cup. on the back side of the cage there is a snapring. remove it and the cage will slide off by hand.
ok well lookin at the half shafts on ebay they hae the inner cv on them and my outter is busted so do i have to get a whole new axle thanks for teh reply dirty4man
nevermind looked again its the outter
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.