getting a 500 naked

1618 Views 5 Replies 6 Participants Last post by dirtyrider6104, Apr 20, 2007

schmitty

Discussion Starter · Apr 20, 2007

I want to give my foreman a good cleaning and check it for any damage. How hard / how much work is it to take all the plastic off. Any help would be great.

Thanks

1 - 6 of 6 Posts

TATORNUTZ

· #2 · Apr 20, 2007

it's really a bunch of plastic pins and a few 10mm and 12mm bolts.The push pins are removed alot easier with a pair of these.

Bigvick

· #3 · Apr 20, 2007

Where can you get those?

marcust

· #4 · Apr 20, 2007

It's not to bad putting it back together is easier than taking it apart. I wish I would have known that there is a tool to take out the plastic rivets.

350hondaman

· #5 · Apr 20, 2007

just get it a few drinks and it'l be alll yours

really tho, have a can of liquid wrench/wd-40 on hand to help on those rusted bolts.

dirtyrider6104

· #6 · Apr 20, 2007

other then buying that tool just use wire cutters they work just easy

1 - 6 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.