Honda Foreman Forums banner

Front Drive shaft Help

1485 Views 2 Replies 2 Participants Last post by  dirty4man
I was just noticed that on my front drive shaft I am missing a boot band on the front boot. It looks just like a rubber o-ring

Is it hard to replace, do I have to pull the shaft out?

If you have a Clymers book for the 98-04 it is on page 306 number 3 in picture 32 and on page 308 picture #41 has an arrow pointing to it

Thanks for any help
1 - 3 of 3 Posts
the o-rings tend to dry rot over a period of time. It is alittle time consuming to replace the rings. the front diff will have to be unbolted and slid forward to remove the driveshalf. I just use zip-ties to secure the boots back on the shalf.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top