I am very new to ATV Industry, so any help would be great appreciated!
I am an owner of a 2004 Foreman ES 4x4. My front brakes have no resistance. I took it to the local ATV shop and said it was front knuckle bearings. I had them replace the bearings and the front brakes were working fine for a day. This past Sat. I had it out and I am having the same problem. I squeeze the front brake lever the whole way... still no resistance. I took the resevoir cap off(on the handle bars) and there is no fluid. Am I correct in assuming that I need to fill it up or is there air in the brake line.. or what? If the fluid is low, do I need to bleed the brakes after I put fluid in? Any help would be appreciated
I am an owner of a 2004 Foreman ES 4x4. My front brakes have no resistance. I took it to the local ATV shop and said it was front knuckle bearings. I had them replace the bearings and the front brakes were working fine for a day. This past Sat. I had it out and I am having the same problem. I squeeze the front brake lever the whole way... still no resistance. I took the resevoir cap off(on the handle bars) and there is no fluid. Am I correct in assuming that I need to fill it up or is there air in the brake line.. or what? If the fluid is low, do I need to bleed the brakes after I put fluid in? Any help would be appreciated
