Honda Foreman Forums banner
1 - 1 of 2 Posts

· Registered
1,472 Posts
Well,start by filling the resevoir,re-install the cover and then pump the lever several times.Then check the fluid and top off if needed.The fluid had to go somewhere,so I suspect you have a leak.You may not have to bleed them.It would be a good idea to remove the front drums and inspect the linings and wheel cylinders.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.