Honda Foreman Forums banner
1 - 1 of 2 Posts

· Registered
47 Posts
You need to clean the bike so you can find the leak. I would pull the wheels & drums to check the wheel cylinders.If it's leaking you should be able to see fluid after repeated brake lever actuation.The only hydraulic parts are the master cylinder,hoses & the wheel cylinders.You do have a Y where the hoses split to go to each front wheel.It is a very basic system so you should be able to find the leak pretty easily if the areas are clean so you can see the fluid.Good Luck,MOON
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.