Honda Foreman Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
136 Posts
I would highly recommend spending the 50 bucks; to reproduce this will take some time but here is what I could find. Once you remove your bumper you can get exact measurements of the bends and holes needed to mount this correctly.



Looks like the mount for that year was shared between the rincon and the rubicon.

Also the installation instructions can be found here.
http://www.montanajacks.com/instructions/65160.pdf

Good Luck,
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top