Honda Foreman Forums banner

Disk conversion Kit

1218 Views 2 Replies 3 Participants Last post by  mudder fudder
Is it difficult to convert the front drum brakes of a 2004, 450 Foreman to disk brakes? I have just started TRYING to work on my quad. I cannot stomach the cost of letting the local ATV shop do anything anymore.
1 - 3 of 3 Posts
No it is not hard.Just follow the instructions.Every mans weakness.MOON
It was simple actually. I am not the most mechanically inclined person, but I did it in about 2 hours, and it was the best $350 I ever spent. Be sure you have a torque wrench, I believe it is a 24mm socket, and metric allen wrenches on sockets. You have to torque everything properly.Some will say you have to have a press to get the lug bolts in, but I didn't use one. Just put them on a solid surface and put a spacer in between and hammer them in, gently. (you will see) Have any problems, PM me and I will shoot you my number if you need to call someone!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.