Honda Foreman Forums banner

clutch kit

1054 Views 3 Replies 4 Participants Last post by  captainmuddin
how hard is a clutch kit to install need to help the pulling power
1 - 4 of 4 Posts
It's not that bad it took me about two and a half hours to complete. I stood my honda on it's ass and moved the fan out of the way and pulled the front cover off the engine and replaced the springs without removing the clutch i was worried it would be too difficult but it all worked out to my advantage. and the kit helped me out alot in the mud so it was definatly a welcome additon.
I just installed one. Purchased a 8" three gear puller from Harbour Freight for $10, clutch came off easily. Well woth the $10.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.