Honda Foreman Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,444 Posts
It should not affect shifting. Like Euro said, did you mess with the adjustment screw. I played with mine a bit and got it out of wack. but it was pretty easy to get it adjusted correctly again.
 

·
Registered
Joined
·
3,444 Posts
There is an adjust ment screw on the front cover you removed to install the clutch. It has a jam nut you must loosen. Then with a flat screw driver you can tighten and loosen the clutch.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top