Honda Foreman Forums banner
1 - 1 of 3 Posts

· Registered
1,236 Posts
Loosen the clutch adjusting screw lock nut. Slowly turn the adjusting screw counterclockwise until resistance is felt. Then turn the adjusting screw clockwise 1/4 turn, and tighten the lock nut to the
specified torque.
TORQUE: 22 N-m (2.2 kgf-m, 16 lb.ft)
After adjustment, start the engine and check for proper clutch operation.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.