Honda Foreman Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
670 Posts
Discussion Starter · #1 ·
how do i check the clutch to make sure it is adjusted properly?
 

·
Registered
Joined
·
1,229 Posts
Loosen the lock nut and turn the adjusting screw one full turn clockwise.
Slowly turn the adjusting screw counterclockwise until resistance is felt, then turn the adjusting screw 1/4 turn clockwise. Hold the adjusting screw and tighten the lock nut. Start the engine and check for proper clutch operation
 

·
Registered
Joined
·
670 Posts
Discussion Starter · #3 ·
i don't want to sound like a total dips**t but where would i find the adjustment screw?
 

·
Registered
Joined
·
560 Posts
It's on the clutch cover at the very front of the engine.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top