is says in the manual to loosen the lock nut & turn the adjuster clockwise until you fell resistance and then tighten it another 1/4 turn & snug everything down & try it out see if that helped
The correct way is to loosen the lock nut.... turn the adjuster screw COUNTERCLOCKWISE until resistance is felt ....then turn the adjuster clockwise 1/4 turn...hold it there and tighten the locknut.I like to adjust it a little looser(it seems to shift easier) by turning it clockwise 3/4 turn.
The trick is to make sure you don't move the adjuster when you are tightening down the locknut because it is pretty tight working in there, but be careful and it will go fine. It makes the world of difference if your clutch is loose.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon