Under the rubber boot just below the button is a pinch nut ..just tighten it a little with your fingers...
Choke Knob?
The choke button/knob on my 04 400AT will not stay in the choke position. It wants to slide back down? So I have to hold it out during warm up.
Is there a way to tighten up the cable or whatever holds it in place??
Is there a way to tighten up the cable or whatever holds it in place??
1 - 7 of 7 Posts
No, not really. It's designed so that if you forget to turn it off it slips backinto place by itself. I have to hold the choke on my Rancher 350 when I'm warming up.
I could be wrong though, thats been known to happen.
I could be wrong though, thats been known to happen.
QUOTE ("Honda Mechanic":34en657x)
Thank You Very Much!!! That was an easy fix I would have never guess'd!Under the rubber boot just below the button is a pinch nut ..just tighten it a little with your fingers...
My Foreman with 10 hours on it was doing the same thing.
Fixed mine.
Fixed mine.
Every Honda with the pull choke has the jam nut under the rubber boot to hold out the choke ..
Thanks so much, spent an hour reading my manual and trying to trace out the cable and looking online for an answer to this........you made my day, thanks !Under the rubber boot just below the button is a pinch nut ..just tighten it a little with your fingers...
1 - 7 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Foreman Forums
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon
Full Forum Listing
Explore Our Forums
Recommended Communities
