Is it possible when they jetted the carb they drill out the main jet? No doubt i'd also have to replace it aswell.. I've installed the new needle and seat.Needle has been drop all the way and i still get a miss, this i think is a result of gettin to much fuel.
Posts by AllHonda
1 - 4 of 7 Posts
I've done it all works the best when i put the needle all the way down,terrible when needle is all the way up,i think the jet itself has been drilled or replaced with an oversize, seems like it allowing to much fuel.
It has to be the stock jet, its numbered 125.But when i bought the machine they told me it had been jetted,the needle i replace was also stock. It does have the K&N filter, so i don't know what they have done to it.. i would say the stock jet has been drilled.
I ordered a new one today. It depends on where you live,what jet you have to run due to altitude. And i just noticed for some reason they have a high altitude jet in it !Where as i live about 8' above sea level.
1 - 4 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Foreman Forums
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon
Full Forum Listing
Explore Our Forums
Recommended Communities
Join now to ask and comment!
