Honda Foreman Forums banner

Carb kit...HELP!!!!!

2273 Views 5 Replies 4 Participants Last post by  trail_shredder_crf
I have a 2004 Foreman 450ES with swamp lite tires? What kind of carb kit do I need?What about a Dyno kit? Where do you get it and how much?? Is it hard to do? It hesitates alot now and I have a jet or something in it that came with my HMF exhaust. I don't know anything about a carb, so I don't know if I put it in right or not.
1 - 6 of 6 Posts
Where is the clip set at on the needle? You will have to open up the top of the carb. and take out the slide to check. If it is not on the bottom space, put it there. The bike should run alot better. Go to www.cheapcycleparts.com and look up your bike for an exploded view of the carb.
hey man i put a hmf exaust on my bike and at first i put in the jet that came with the exhaust wich is a size 135 and it ran good but every1 is talkin bout these dynojet kits so i bought one and tried it and it came with 3 or 4 jets the biggest one it had was a 134 and i installed i didnt like it near as much if i werr u i would jus use the jet that came with it and mess with the air fuel misture screw at the bottum of the carb and mine runs great i didnt even hav to touch the needle
I am going to try to adjust on it tonight.

Thanks guys!! I will let you all know what it turns out like!
If you go to the DynoJet website it will explain how it all works and where to set everything depending on how far above sea level where you live and ride.I have one in my 4Man and one in my Z250.I have a WB pipe on the 250 and a snorkel on the 4Man.DynoJet is the way to go.
QUOTE ("PistonHed":k89d09ix)
If you go to the DynoJet website it will explain how it all works and where to set everything depending on how far above sea level where you live and ride.I have one in my 4Man and one in my Z250.I have a WB pipe on the 250 and a snorkel on the 4Man.DynoJet is the way to go.
got a link?
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top