Honda Foreman Forums banner

can't get an answer!!!!!!!!

1417 Views 3 Replies 2 Participants Last post by  Anonymous
got the 2" snorkle, K&N filter, Iridium plug, will these make it where I can handle a 6000 ft increase in altitude by just adjusting the a/f screw, or do I need to re-jet for the trip?
1 - 4 of 4 Posts
Don't know if this helps but service manual for my bike says to use standard jetting when operating below 5000' and high altitude jetting for 3000-8000'.
what size is considered a high altitude jet?

I run the 160 main jet. Ride 6,000 - 12,000 feet. K&N and Dyno kit installed.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.