Honda Foreman Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter · #1 ·
Like what size pipes you need abd how many of each.Also what do you use to seal the pipes??
 

·
Registered
Joined
·
670 Posts
you will get 50 different answers. everyone builds theirs differently.

personally i used 2" pvc pipe, stright out of the airbox, down the right side, behind the shock and up right behind my winch through that little square access panel...i think i used 6 connections and sealed them with pvc glue...that's it...
 

·
Registered
Joined
·
34 Posts
1 1/2" from the air box, and then with a rubber connector went to 2". i also went down the right side and up through access panel on the front. I would suggest just buying some 90's and some 45's and some pipe and playing with it until you get it the way you want it. then mark all the joints and assemble as much as you cann off the bike. Then slip it on and glue the rest of it together.
 

·
Registered
Joined
·
34 Posts
1 1/2" from the air box, and then with a rubber connector went to 2". i also went down the right side and up through access panel on the front. I would suggest just buying some 90's and some 45's and some pipe and playing with it until you get it the way you want it. then mark all the joints and assemble as much as you cann off the bike. Then slip it on and glue the rest of it together.
 

·
Registered
Joined
·
305 Posts
If you do a search you can find tons of info and pics on how to make a snorkel.

This is the list of parts I used in mine in order from air box to top of snorkel.

1 1/2" 45 deg elbow

4" long 1 1/2" pipe

1 1/2" 45 deg elbow

5" long 1 1/2" pipe

2" to 1 1/2" rubber reducer

11" long 2" pipe

2" 45 deg. elbow

8 1/2" long 2" pipe

2" 45 deg. elbow

Short piece of 2" PVC to connect 45 and 90

2" 90 deg. elbow

Short piece of 2" PVC to connect 90 to threaded coupler

2" threaded coupler

16 ga sheet metal I would have used thicker but I had this laying around.

2" galvanized steel pipe coupler

2" threaded coupler

A piece of 2" PVC how ever long you want your snorkel to be.

2" 90 deg. elbow
 

·
Registered
Joined
·
187 Posts
what marcust said
 

·
Registered
Joined
·
560 Posts
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top