Honda Foreman Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
360 Posts
Discussion Starter · #1 ·
while i was riding last night i noticed that it is my breaks squeaking (i think) they only squeak when i hit a bump. could this be my breaks? if so, how do i fix it? my bike is about 10 months old, should it be time for new front breaks?
 

· Registered
Joined
·
136 Posts
Big clump of dirt in between the pad and the rotor. At least mine always does this after riding in the peanut butter mud.

Tip: Turn your atv up on the back racks when cleaning with a pressure washer and point the nozzle towards the caliper and roter. Not to close don't want to damage a boot. But you should see dirty water coming out of the housing, just keep spraying until the water coming out of the roter is clear and it should be fine.

I have heard that the front breaks are self cleaning with the shroud around the caliper and the pad but I'm not to convinced.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top