Honda Foreman Forums banner
1 - 3 of 6 Posts

· Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Hey,

I recently rolled my quad, so during the down time i installed a 2" snorkle , Ran too lean. So i installed the jet kit 165,3 down on needle and 2 1/2 turns out a/f. But I am getting black smoke out and and have to have the idle all the way up just to idle. I tried turning the a/f screw in and out and it made no difference. So i cleaned out the carb and tried again... same thing.. i am about to light the @!$! on fire..

help please..
 

· Registered
Joined
·
27 Posts
Discussion Starter · #3 ·
Hey!!

thanks for the advise! Tried cleaning it and broke some stuff on the carb while doing so ,.... then I managed to take the hammer and break a couple more things on the carb ...
All in all i ordered another complete carb from bike bandit. Will update if the new carb helped!

thanks!
 

· Registered
Joined
·
27 Posts
Discussion Starter · #6 ·
Hey
Just wanted to update,,.,
I bought a rubicon carb from bikebandit and put it on my foreman 500. The carbs are a bit different but it works like a charm. I pulled out a couple trees this weekend with it and had no problem!!

thanks
 
1 - 3 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top