Honda Foreman Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
339 Posts
Discussion Starter · #1 ·
Hi Gang,

Just finished my Lift and noticed my front tires are now toeing in instead of toeing out like they were stock. This of course is not unexpected due to the increased angle of the tie rods after the lift.

My question is for those that installed lifts did you adjust it back like it was stock, dead straight, leave it toed in, or.....??

Thanks again as always,

Dave
 

·
Registered
Joined
·
404 Posts
I had mine adjusted straight again after lift.
 

·
Registered
Joined
·
339 Posts
Discussion Starter · #4 ·
Thanks guys!
 

·
Registered
Joined
·
118 Posts
Yes agreed should be out a bit 15 to 20 mm . i believe , but wouldn't really notice any difference at low speeds, but at higher speeds with out any toe out , you will feel the machine wanting to wander back and forth , toe out keeps the machine trackable ."running straight under control" , has to do with momentuim etc physics ... not going there
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top