Honda Foreman Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
343 Posts
Discussion Starter · #1 ·
Those of you who use the heated handgrips, where do you take the power from? I thought about getting juice from my cigarrete lighter plug since it's on only when the switch is. Would this be okay? Also I will be running the thumb throttle warmer and could I bring the power for it from the same place or would it be best if they were run from 2 different wires?

Thanks!
 

·
Registered
Joined
·
514 Posts
That is where I got mine from for both the thumb and the grips and it worked fine for me, plus I forget mine on all the time so it is nice to have them go off with the key.
 

·
Registered
Joined
·
89 Posts
I got mine also from the acc. wire, that is the pink wire,
When you tap this wire, when having the ignition to off = 0 Volt no light and when the ignition is at ON position, you have a bit more than 12Voltslight ON!!!

It's the best place to plug, if you forget your hand warmers ON they wont
drain your battery!

DuckyXpress.
 

·
Registered
Joined
·
89 Posts
I got mine also from the acc. wire, that is the pink wire,
When you tap this wire, when having the ignition to off = 0 Volt no light and when the ignition is at ON position, you have a bit more than 12Voltslight ON!!!

It's the best place to plug, if you forget your hand warmers ON they wont
drain your battery!

DuckyXpress.
 

·
Registered
Joined
·
343 Posts
Discussion Starter · #5 ·
Thanks guys! I also talked with a friend of mine that works on atv's. I believe what I'm gonna do is run the grips to the pink acc. wire and then take the thumb warmer to the cig. lighter. That way one wire isn't having to supply both loads.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top