Honda Foreman Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
(back story)
I've recently picked up what appeared to be a nice foreman 400 to pick up a new hobby. It hasn't given too many problems until now.

Ended up taking on some "pull your boot off mud" and had to be winched out. While hooking up the winch, the foreman stalled and refused to turn over. Got pulled back to the trailer and noticed it will turn over but will not spark.

Since then, I've replace the plug, ignition coil, cdi, voltage regulator/recitfier and battery (which was already on its way out). Still no spark.

Is there a chance it could be the stator or something internal?
Is there a way to troubleshoot this further?

Thanks in advance
 

·
Registered
Joined
·
13 Posts
Make sure it is in neutral or it won't spark. I don't want to sound like a smart a here but make sure your kill switch is on on. I actually was trying to figure out why I didn't have spark on my trx for five hours, then decided to turn the kill switch back to on.:mad:
 
1 - 6 of 6 Posts
Top