There will be a gap on each, but there shouldn't be any side to side or up and down slack at all. if they will not tighten up any you may need to change them
The easiest way I found to get the bearing race out is to weld a bead around the inside face of the race. it will shrink it enough to let it slide out.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon
