Honda Foreman Forums banner

96 trx400fw no ign.

2.9K views 1 reply 2 participants last post by  Britton  
#1 ·
hello " do anyone have a good wiring schm. for this model the one i downloaded off the net has had me chasing my tail.
neutral wiring is different in the wiring main diagram than the seperate pages can not trust it. .
worked on honda since 1971 but this thing in running me nuts.
first no fire at plug. passed all ohms test
with old cdi box .
replaced voltage regulator. sparked started it ran for 15 seconds and died nomore spark.
then started blowing 10a ign fuse.
replaced cdi stoped blowing fuse but no spark.
looks like there have been several 400s of the same troubles.
can any one point me to the a solid check for this trx.
 
#2 ·
I also have no spark at the plug. I have replaced the regulator, the icm, and will be replacing the coil tomorrow If it comes in the mail. let me know if you figure out the problem. seems that a lot of people have replaced the kill switch and the key switch and had some good luck. .:frown2: