Honda Foreman Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
had a no start and leaky overflow. finally did a carb clean(lemon boil and kit) cleaned tank new petcock (filter was trash) still no start.
Tracked it down to no compression(open /stuck intake valve)
The bike always had top end tick when warmed up after a low oil event.
when pulling the head is there anything i should be aware of beside new head gasket and proper torque
thanks
 

·
Registered
Joined
·
18 Posts
Discussion Starter #3
so valves check out good .had a new seat and guides put in.
cylinder and piston look great
Have a new head gasket.
reinstall seems pretty straight forward, 29 lb from what i can see,
 
1 - 3 of 3 Posts
Top