[doneking]

I never could find an adequate rack for my new Foreman that met my needs. So, I decided to design my own.

Here ya go -- What do ya think?

I'll be installing it in a few days and will get a few pics up with it on. I've laid it on top of the rack and it looks really mean. I ought to be able to throw a deer up there with no concerns now. That factory wimpy rack just wasn't goin' to cut it.



DK

 

[doneking]

I'll be keeping the original rack and just mounting this on top of it.

I'll either use some Square type U-bolts or 1/4" Carriage bolts and drill through the rack to install.

DK

 

[doneking]

I won't try and pull the wool over anybody's eyes. I designed it, but I didn't do the welding. I had a friend that is a welder do all of that. I'm not as good a welder as he is. It would have taken me a lot longer and probably would not look as pretty on the welds.

Parts + adding up the hours to cut the pieces and weld them + paint.

$145.00

Not cheap by any means, but custom doesn't usually come cheap as most of ya'll know. Plus, I couldn't find anything like it around the local ATV stores and Internet.

I wanted to see if I could get a few banged out and try and sell them, but they would probably have to be priced around $190ish to make it worth while. I know some could respect that price for this type of work.

I'm hoping to get it mounted this weekend. I'll be sure to take some pics.

If anyone is interested in one -- I made a template up and could get all the measurements posted. That way you could make your own. As far as selling them....I don't know how I'd go about getting an order list started.



DK

 

[doneking]

Roughly about 10-15lbs.

 

[doneking]

A little late for an update, but here are pics of the rack installed.

It handles a deer quite well. Far better than anything I could find in production.


DK

 

[doneking]

seeley,

No, I don't have the template anymore, but I can get the measurements if ya like.?



DK