Honda Foreman Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Rubicon 500
    I have a 2004 TRX500FGA. The meter display was very hazy, so I bought a new upper case cover. With the cover off I noticed the LCD screen has UV damage in the middle (dark spot). I'm looking for a new LCD screen or someone who can replace the UV film. OR if not possible I would want to buy a...
  2. Foreman 500
    Recently brought a 2005 500 foreman that 4wd wasn't working. Found fault codes etc and unplugged all sensors and cleaned out. The front propshaft now engages and 4wd fault code has disappeared. I now have another code 5 blinks - ecm motor drive circuit. I can't find any info on how to fix this...
  3. Rubicon 500
    So I recently cleaned my carb because I suspected the slow just was clogged, which it was. Anyways I reassembled everything and did the whole reset/calibration process after adjusting the OHMS on the TPS to 600 exactly. I have the repair manual and have followed to steps for that part. Now I...
  4. Rubicon 500
    I have a 2005 trx500 foreman rubicon and it will not move when put in any gears while running. So far I’ve gotten the oil tank and the clutch casing off and waiting for a clutch puller to come. But by the look of it from peeking though gaps the oil pump chain looks like it is still on which was...
  5. Rubicon 500
    I am doing a top end rebuild on an 01 rubicon. I found TDC and installed the camshaft with the “line” marking on the gear in the down position. The motor won’t start sounds like it’s in the wrong spot. Also I had the head bored and install a 93.00mm piston and ring.
  6. Rubicon 500
    I have a 2001 TRX500FA Rubicon 500. bought from someone that it had been sitting up for a while. I got it running, but looks like the owner had lost a few parts. I have the airbox, but no lid. I am trying to buy a lid off of ebay to save money instead of buying a new one at $50. What all year...
1-6 of 6 Results
Top