Honda Foreman Forums banner
help
1-5 of 5 Results
  1. Rubicon 500
    I am doing a top end rebuild on an 01 rubicon. I found TDC and installed the camshaft with the “line” marking on the gear in the down position. The motor won’t start sounds like it’s in the wrong spot. Also I had the head bored and install a 93.00mm piston and ring.
  2. Foreman 500
    I bought a 2021 foreman 4x4 and snorkeled it, etc. It’s a great mud bike. I took it through a friends pond and quickly realized I was in deeper than I thought. I sunk it in about 8 feet of water. The pond was a hard bottom, no mud, no sand, so I don’t think anything too bad happened to the...
  3. Foreman 500
    Hey guys, I recently bought a 2021 Honda foreman 500 from someone off of Facebook marketplace. This bike had 200 miles and about 50 hours on it when I got it. This bike has a 30% gear reduction, snorkel, radiator relocate, etc. Whenever I take it in water, when it comes out sometimes there’s a...
  4. Foreman 450
    Hey guys was wondering when people say that the chain tensioners should be spring loaded does this mean it should move up and down when the screw on top is fully in or? My chain seems to tight but not really sure how tight it should be. thanks in advance
  5. Foreman 500
    Help!! I have a 2018 foreman 500 that is now stuck in 4x4 and diff lock. Will not come out for anything. Won’t make any noise to even try to disengage. Have checked all the plugs for 4x4 and relays. There all good. Ordered a new diff switch and hopefully that’s solves problem but if not does...
1-5 of 5 Results
Top