its best to do all three stages at the same time on the carb when you install a pipe and filter. idle to 1/4 throttle the mixture screw, 1/4 to 3/4 throttle needle, and full (wot) main. so that your carb will be uniform when delivering the fuel. besides if you just change your main jet and adjust the ide mixture then chances are you will be running lean 1/4 to 3/4 throttle. and for most people that ride this is where you usually have the throttle at.
__________________
08 black 700 rhino (sold)
03 yellow 450s (sold)
07 black 500 (sold)
i no longer own any hondas
but they wont be forgotten especially the black 1
10 750 blue nocturnal brute
|