kajunboy89

so i decided on waterproofing my recon to take in deep holes and trenches. i'm going to snorkel it off, and im thinking of putting exhaust and a jet kit. any suggestions on anything or where to start? someone had told me to silicone the airbox and grease a bunch of things. HELPPPPPP ME

Duke70

QUOTE (jman6480 @ Jul 19 2009, 11:42 PM) Frist off to the forum

Snorkle: when you go to snorkle your bike out make sure your air box is good & tight, put grease around the lid which makes for a good seal and make sure where your snorkle comes into the box is good & sealed, run all your vent lines atleast up to your headlight or run them up beside your snorkle, You have to vent lines on your carb that you need to run up and you need to put a plug or shutoff valve on your drain line, I've even got my gas tank vent line run up with all my other vent lines

Grease: Use "Dielectric grease" on all your connections this will keep them from shorting out and keep them from corroding

__________________
To all members PLEASE add your location to your profile



06 Honda Foreman 500s
30'' Mudlites
HL Springs & 2'' SS lift front
01 450 swingarm custom lift rear
Custom Built Snorkel & Powder Coated
2500 Warn Winch
Warn Front Bumper
Benson Rear Bumper
170 main-jet & 48 slow-jet
K&N air & oil filters


Powder Coating
http://www.pcitdad.com/
Rear Lift for Swing-arm Conversion 450 arm on a 500
http://www.pcitdad.com/lift-kit.html