billygoatkid

I did the wiring job on my Rincon today to bypass the rev limiter in reverse. The problem was that when in a mud hole, or pulling some downed trees, the rev limiter would kick in, preventing the quad from pulling at max torque. After finding the plug, under the seat on right side of air tube, I pulled the three prong plug. The wires were Blue, Grey and Green. I left the green wire alone. I cut the grey wire, and spiced it into the blue wire. This was easy because I had a conector that just crimped around the spiced wire and the wire which I cut. I taped, and heat shrinked the connector and wires.
Worked great. Display now says "D" when in reverse, and is a permenant solution to the reverse rev limitor.

gsxrjarrett

got any pictures of the plug and mod ?

Thanks brother.

__________________

Koolfreak

Good job!! will try on mine too...