cutter64

don't know exactly what could be causing this but the first problem I had was that i thought i lost 1st gear (starting in 2nd and not downshifting like normal when you decrease speed) in both auto and manual shift. I had it up to 60 so I knew i at least had 2nd and 3rd. Then out of no where the next day i had 1st gear but it would not shift into 3rd in auto or manual. it will cut out at 43mph and at that speed if you switch it from auto to manual it will indicate that it is in 3rd when it obviously isn't. fluids are good on it and after reading through some of the tips the only thing i haven't done is check oil pressure in tranny or the electronic connections which idk if that would be the issue?

All help would be greatly appreciated!

YFZR450

Having the same issue but you described it a lot better.LOL
Would like to know what to check.

2003 foreman es

to the forum.... Check what you said.
Depending on wheather or not you ride through deep water, electrical connection may need to be cleaned and di-electric greese applied.

__________________
03 Foreman ES
Too much to list...

toodeep

Wow, I missed the original post some time ago. Is the indicator flashing at all? If it is count the number of flashes.

2003 foreman es

Huh? I did'nt even notice that date. Sorry...

__________________
03 Foreman ES
Too much to list...

cutter64

I have since got a new 2010 Rincon. No, there was nothing flashing what so ever. Had me baffled all electrical connections were cleaned. Don't know if a piece of dirt somehow could have made its way to the tranny? Really have no idea what happened.

2003 foreman es

Congrats on the new machine....

__________________
03 Foreman ES
Too much to list...