ipetrie_99

Hi guys I'm new to the sight here and after looking through the forums I couldn't find anyone with the same problem as me but they all sort of got the same answers back and I will try try them like clean all connectors and stuff.
When I put my bike in reverse and back up everything is ok but once I put it in drive I get error lights flashing on the dash at a consistent flashing and won't come out of first gear. It's doesn't flash 5 times, stop and repeat to get a code. I can shut off the bike and start it again and it will be fine but just don't trust it to go on a long trip. My battery is fine and checked the connections around it. Any ideas? Anything will help

rich450es

welcome to the forum !
im not realy good on the rubicons but someone will chime in to give you a hand !
if you need a manual just PM me........rich

__________________
2000 foreman 450 es-s
the f**king pig
14% 300 foretrax gear reduction
30in gorila silverbacks on C-5 wheels
2500lb warn winch
superatv disk brake conversion kit
2in ssatv lift kit and progressive 512 shocks
the original 4in PVC storage tube
hurculined racks with rear cargo box
czr loud exhaust , uni airfilter and drilled main jet
foreman 450 parts for sale
pm me for info

Eagle_On

make sure your switch for D1, D2, and esp is not in the middle of two

__________________
04 rubicon
-28 zillas

ipetrie_99

I'm pretty sure I tried switching the D1 D2 and esp and it still wouldn't come out of first gear. I'm working offshore right now for a few more weeks so i can't try anything just yet but thanks for the replies.

Eagle_On

when mine did this. my battery was dead and had a bad connection

__________________
04 rubicon
-28 zillas

Eagle_On

test the angle sensor. do you need a manual?

__________________
04 rubicon
-28 zillas

toodeep

Your getting problem code 5 (5 flashes)? If so that is the angle sensor system and a good place to start testing stuff.

Welcome to the forum.