code 5 again....... - Honda Foreman Forums : Rubicon, Rincon, Rancher and Recon Forum

bradylandusa · 04-22-2008, 12:26 PM

Ight i just replaced the angle sencer not even a month ago, and now it is comeing up code 5 again, but get this it will only do it when you put it in reverse, will not do it in d1, d2, or esp. i pulled it back down this past weekend and cleaned everything from top to bottom, pulled the control moter and checked the inside of it it had no signs of water ever being in it, the gear was stuck so i took a screwdriver and got it free. the angle sencer tested good and the contol motor works good when connected to the battery. i dont know what else to do besides take it to the honda shop and get charged an arm and a leg to get it fixed ........ help please

**toodeep** · 04-22-2008, 01:04 PM

whats it doing when not working

bradylandusa · 04-22-2008, 02:41 PM

it will start spurtering and code will start flashing when you put it in reverse only, will go throught 1st to 5th gears just fine.. when i put it in reverse i have to shut it off and clear the code and restart before i can go foward

**toodeep** · 04-22-2008, 03:16 PM

mine would do that (without the code) sometimes if the brake light/lever would stick on. might want to try to reinitialize the system and see if it helps.

hondaman5002002 · 04-22-2008, 10:22 PM

mine did the same thing one time. it was the switch under the shifter. it was full of mud and the little switch aculator was bent. So I rebent it and works great ever since.

04-22-2008, 12:26 PM	#1 (permalink)
bradylandusa Honda Rider Join Date: Sep 2007 Location: Selma Alabama Posts: 46	code 5 again....... Ight i just replaced the angle sencer not even a month ago, and now it is comeing up code 5 again, but get this it will only do it when you put it in reverse, will not do it in d1, d2, or esp. i pulled it back down this past weekend and cleaned everything from top to bottom, pulled the control moter and checked the inside of it it had no signs of water ever being in it, the gear was stuck so i took a screwdriver and got it free. the angle sencer tested good and the contol motor works good when connected to the battery. i dont know what else to do besides take it to the honda shop and get charged an arm and a leg to get it fixed ........ help please __________________ If you cant swim, Dont ask to ride. <a href="http://www.myspace.com/bradyjosh01" target="_blank">http://www.myspace.com/bradyjosh01</a> 2006 Honda Rubicon 500 snorkeled 26'' Kendra's HMF pipe Jetted to 165 extended ventlines 2'' lift Fan switch Switch on handlebar light Hand made fiberglass speaker box IPOD 2'' Wheel spacers on Front 3" Wheel spacers on Back more to come

04-22-2008, 02:41 PM	#3 (permalink)
bradylandusa Honda Rider Join Date: Sep 2007 Location: Selma Alabama Posts: 46	it will start spurtering and code will start flashing when you put it in reverse only, will go throught 1st to 5th gears just fine.. when i put it in reverse i have to shut it off and clear the code and restart before i can go foward __________________ If you cant swim, Dont ask to ride. <a href="http://www.myspace.com/bradyjosh01" target="_blank">http://www.myspace.com/bradyjosh01</a> 2006 Honda Rubicon 500 snorkeled 26'' Kendra's HMF pipe Jetted to 165 extended ventlines 2'' lift Fan switch Switch on handlebar light Hand made fiberglass speaker box IPOD 2'' Wheel spacers on Front 3" Wheel spacers on Back more to come

04-22-2008, 10:22 PM	#5 (permalink)
hondaman5002002 Honda Rider Join Date: May 2007 Location: Palm Harbor, Fl Posts: 88	mine did the same thing one time. it was the switch under the shifter. it was full of mud and the little switch aculator was bent. So I rebent it and works great ever since. __________________ 07 Honda Rubicon HL Clutch Kit Mud Buster Cam HMF Pipe Custom Radio Box Jet Kit HL Springs HL Lift Recoil Cover Custom Snorkel and all vent lines ran to snorkle 28" outlaws gorilla axel! Hot wired fan to switch rear wheel spacers HL temp gauge HL full skid plate pachjage new strong made rear bumer heat guard

04-22-2008, 01:04 PM	#2 (permalink)
toodeep Administrator Join Date: Aug 2007 Location: south dakota Posts: 6,652	whats it doing when not working

04-22-2008, 03:16 PM	#4 (permalink)
toodeep Administrator Join Date: Aug 2007 Location: south dakota Posts: 6,652	mine would do that (without the code) sometimes if the brake light/lever would stick on. might want to try to reinitialize the system and see if it helps.

Remove Advertisements Sponsored Links
Honda Foreman Forum Advertisement