Hondarancher

I have a rancher 2000 and lately I have been having trouble with starting the bike. A few years ago with put a toggle switch on the bike as a bypass to start it Recently during hunting season the bike would not start but the pull starter was working. Yesterday I was on the bike had no problems and a few hours on it on got off left the bike running while I was Filling my food plots and the bike died. At first I tried to start it all I heard was clicking. I used the pull start and it started right up. Drove about 5 minutes and the bike died while coming down a mountain and nothing would start it. The pull starter wasn't working and all I heard was the clicking. The lights was very dim and then shut off completely. There is a brand new battery in the bike. I replaced it after the first time it did this( I bought the bike brand new in 2000 and never replaced the battery this was the first). Now I have no power and it won't even pull start. Please help. I think it might be the solenoid, could be regulator

rich450es

welcome to the forum
put a battery charger on it and see you can get it to start . if you can get a volt meter on the battery and see what its charging at ,running (it should be 13.1 to 14.2 normal )
here is a manual for you to download for free
2000-2003 Rancher 350 Service Manual.pdf

__________________
2000 foreman 450 es-s
the f**king pig
14% 300 foretrax gear reduction
30in gorila silverbacks on C-5 wheels
2500lb warn winch
superatv disk brake conversion kit
2in ssatv lift kit and progressive 512 shocks
the original 4in PVC storage tube
hurculined racks with rear cargo box
czr loud exhaust , uni airfilter and drilled main jet
foreman 450 parts for sale
pm me for info

Hondarancher

Thank you for the welcome message and the quick post. I'm going to try to charge it and then see if I can try and figure out the voltage. This really shouldn't be an expensive fix but I got to do it ASAP. Second bow season starts December 26