Rancherat04

Hey guys i've seen other threads on here that helped others so i joined up today tosee if i can get some insight on my problem.Alright ive been workin little bit on a 04 rancher 400at recently and ive nevr worked on newer 4x4 quads like this i cleaned the carb which also means i disconnected the tp sensor and throttle cable, i checked the codes and the esp is throwing code 4 which i believe to be the tp and the 4wd is throwing code 4 for voltage my question is there a specific way that i was supposed to put the tp sensor back on or do i have to reinitialize it just because i took it off to clean the carb

Helmut

Since you unplugged the TPS, you will need to perform the initialization procedure. Also, since you're getting the system voltage code, make sure you have a good battery and that it's fully charged.

__________________
2000 Foreman 400
2004 Grizzly 660
Both stock, except for Mudlites and Kimpex rear storage box.

rich450es

welcome to the forum rancherat04!

__________________
2000 foreman 450 es-s
the f**king pig
14% 300 foretrax gear reduction
30in gorila silverbacks on C-5 wheels
2500lb warn winch
superatv disk brake conversion kit
2in ssatv lift kit and progressive 512 shocks
the original 4in PVC storage tube
hurculined racks with rear cargo box
czr loud exhaust , uni airfilter and drilled main jet
foreman 450 parts for sale
pm me for info

2003 foreman es

to the forum....Helmut is one of the best on this forum. He knows what he's talking about.....

__________________
03 Foreman ES
Too much to list...

Tank

Welcome to the forum,

__________________
F&AM Rockwell 191 PM
08 Foreman ES Camo
XTREME 2" lift
26in Swamplites, ITP wheels
Moose skid plate
Tusk hand guards
1 1/2" wheel spacers
4" storage tube "Black"
2 50 cal ammo cans "Black"
WARN XT2500
Hockey puck spring spacers

07 Recon ES Green
1 1/2" wheel spacers
2" lift
Tusk hand Guards
Rancher wheels and tires