Hey fellas , new to the forum here . I've got s 350D that ive rebuilt the motor (jug/head) it used to go into gear before I did the rebuild now that it runs it won't go into gear well I say that it jumps but I can still push it like its in neutral I can rev the motor up and still nothing doesn't matter the gear it won't move just jumps any ideas would be appreciated it's got me stumped I'm usually a Polaris man .
Work I've done to it
New piston and rings
new valves all set at .08 clearance
New rocker cover
New timing chain and comps.
The inner clutch plate stuck when putting together the change clutch. Remove the right side cover and I bet the disk are just floating in the clutch basket instead of being tight together. Just loosen the 4 bolts to free it and tighten them back up.
Hey fellas , okay this four wheeler will run sometimes it's acting weird cause it has spark intermintly fuel pump comes on sometimes I've heard the CDI box controls this . I've also read that i can by pass the cdi and put the fuel pump on a switch but why do I have spark sometimes and not the other . Please help
First thing to delete is the left handlebar kill switch. It is very seldom used so corrosion can cause issues. Second would be to check the connectors to make sure a terminal isn't pulled out just a touch.
I'm gonna take all the connections off and die electric grease all connections
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Honda Foreman Forums
537.3K posts
43K members
Since 2005
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon