Just picked up a shell of an 06 FM. Buddy needed some parts and I did too so we're going to get what we need and sell the rest.
Motor, carb, seat, pod light, front axles and rear end are gone.
Has
Gas tank with petcock
Lower headlights
Front diff
Airbox
Brake calipers, rotors, hubs. Am going to see if knuckles look ok. If so, would be a great disc brake conversion for a 400 or 450
ECU
Wiring harness with fuse box
Meter/speedometer
Following parts are PICK UP ONLY in East Arkansas
Yellow plastics, missing one tank cover and front fender is cut for snorkel
Front rack
Rear rack
Front bumper.
Might be a few days before I really get to tear into it and check things over. Post up if there's anything of interest.
Also, the bike that I needed parts for had an HMF on it, which I removed and replaced with a stock muffler. HMF is silver, no tip. $100 firm + actual shipping cost.
Actually a guy in Wynne wants it. I'm going to Hardy to canoe this weekend so if he can't meet me tomorrow when I come through there I'm gonna drop it off with you and he can pick it up from you at work.
I've got to get the other knuckle off the bike. Calipers and brakets look good, hub/rotors are good, and the right knuckle looked good. Pressed bearing out of right knuckle, but it was tight coming out. Still have to get the left knuckle off. Will probably be the weekend before I get to it, but I'll text you pics.
Here's the front brake setup. $125 + the ride gets you two knuckles with dustcovers, two hub and rotor assemblies, two calipers and attached hoses. Would probably put new ball joints and bearings in if I were installing them but they didn't feel too bad before I removed them.
Just picked up a shell of an 06 FM. Buddy needed some parts and I did too so we're going to get what we need and sell the rest.
Motor, carb, seat, pod light, front axles and rear end are gone.
Has
Lower headlights
Front diff
Airbox
Brake calipers, rotors, hubs. Am going to see if knuckles look ok. If so, would be a great disc brake conversion for a 400 or 450
ECU
Wiring harness with fuse box
Meter/speedometer
Following parts are PICK UP ONLY in East Arkansas
Yellow plastics, missing one tank cover and front fender is cut for snorkel
Rear rack
Might be a few days before I really get to tear into it and check things over. Post up if there's anything of interest.
If you get a bad part from Powersportsnation they will replace it. They aren't always the cheapest but they sell good parts and stand behind what they sell.
ECU is available for $65 shippped to lower 48, and worked fine on my 06 when I tested it. As with all used electronic stuff, the ECU would be "as is".
I used the wiring harness on another project, but powersportsnation.com has them cleap. I just rewired an 01 Rubicon using a used harness from PSN and it was in perfect shape.
I've had several times I thought an ECU was bad and have yet to actually have the problem be the ECU. You sure yours is bad?
Well dang. I didnt look at the date on the thread, just saw it was at the top. Im in Lake Charles, La. im debating on buying a frame. Depends on the deal. The one I have has a spot that rusted through. I can fix it, I just worry about the rest of the frame
You on facebook? Guy named Ted Thomas down there has a lot of parts including 500 Foreman stuff. He's in Slidell. If you're not on FB send me a PM with your contact info and I'll forward it to him.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Honda Foreman Forums
537.3K posts
43K members
Since 2005
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon