thetater11

I just installed a SuperATV disc brake kit on my ATV and went to put the front wheels on and noticed the disc brake and caliper is too wide for the inside of the rim. Are these kits supposed to be able to fit into stock wheels? The wheels I have are after market 11" and after measuring the inside of the wheel where the disc brake would end up, it's only about 9". When I measured across the disc brake to the outside of the caliper, it was a little over 10". Anyone have the same problem? Do I need to get some stock wheels? I'm not sure what size wheel will fit.

I found some stock wheels on craigslist that are from a Yamaha atv and they're fronts are 25x8x12 and rears are 25x11x12? Would these work? Not sure if the bolt pattern is the same.

Thanks!

__________________
1996 Foreman TRX400FW - Green
SuperATV Disc Brake Kit
Snorkle
2" Lift
27-9-11 Super Swampers
Rear seat/storage

Repairs underway:
Rear diff rebuild
Rear brake rebuild
New carb
New bearings front/rear
New real axle

rich450es

man that sux but right in the add it says 12in wheels only !factory or aftermarket (thay will also rub on the rubicon factory aluminum sometimes )
if the wheel bolt pattern is 4/110 and thay come off a straight rear axle (SRA)wheeler !

__________________
2000 foreman 450 es-s
the f**king pig
14% 300 foretrax gear reduction
30in gorila silverbacks on C-5 wheels
2500lb warn winch
superatv disk brake conversion kit
2in ssatv lift kit and progressive 512 shocks
the original 4in PVC storage tube
hurculined racks with rear cargo box
czr loud exhaust , uni airfilter and drilled main jet
foreman 450 parts for sale
pm me for info