Starter - Honda Foreman Forums : Rubicon, Rincon, Rancher and Recon Forum
 
LinkBack Thread Tools
post #1 of 4 (permalink) Old 10-13-2010, 11:36 AM Thread Starter
Honda Rider
 
Join Date: Oct 2010
Posts: 2
Starter

What is the easiest wat to remove a starter on a trx 300
northern is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 10-13-2010, 11:48 AM
Administrator
 
toodeep's Avatar
 
Join Date: Aug 2007
Location: south dakota
Posts: 11,242
Garage
Welcome to the forum. You need to remove the 5 bolts (8mm socket) holding the reduction gear cover on (left side of motor straight out from the starter). Remove the upper reduction gear, remove the positive cable on the starter (10mm wrench) and the 2 bolts holding the starter to the crankcase (depending on the year either a 10 or 8 mm). The bolt to the back side has the ground cable to it, just make sure you don't forget that when going back together.



2007 420FM (475cc, 27x12x12 Mudbugs) ---------- 1995 300FW (webcamshaft, 350 rear end)
2008 420FE (26x9x12 BearClaws) -------------------
1988 300 (old stock machine, nothing fancy)
2009 420FA (25x8/10x12 BearClaw HTR) ---------
1987 350D (work in progress)

toodeep is offline  
post #3 of 4 (permalink) Old 10-13-2010, 01:03 PM Thread Starter
Honda Rider
 
Join Date: Oct 2010
Posts: 2
alright i removed the cover and the gear but cant pull the starter out it is hitting on the case do i have to remove the whole side cover to the generator and everything just to get it out all the way?
northern is offline  
post #4 of 4 (permalink) Old 10-13-2010, 01:09 PM
Administrator
 
toodeep's Avatar
 
Join Date: Aug 2007
Location: south dakota
Posts: 11,242
Garage
No, there is just enough room to angle it out without removing the cover. Slide it back a touch (so it's free from the case) angle it up and finish pushing it back. You should be able to twist/angle it away from the case and pull it towards you and it will be out.



2007 420FM (475cc, 27x12x12 Mudbugs) ---------- 1995 300FW (webcamshaft, 350 rear end)
2008 420FE (26x9x12 BearClaws) -------------------
1988 300 (old stock machine, nothing fancy)
2009 420FA (25x8/10x12 BearClaw HTR) ---------
1987 350D (work in progress)

toodeep is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome